{"title":"F-4 Phantom Coll","description":"","products":[{"product_id":"f-4-phantom-a-c-air-intake-for-academy","title":"F-4 Phantom A\/C Air Intake (for Academy)","description":"\u003cp\u003eCorrected 1:48 A\/C air intakes for Academy's short nose F-4 Phantom series (F-4B, C, D, J, N and S). Drop fit resin replacement part - all it takes is a little superglue and a swipe of filler to blend it in. A vast improvement in shape with little effort.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":46752625983741,"sku":"HMR 48011","price":600.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/ACIntakes.jpg?v=1760836734"},{"product_id":"f-4-phantom-slotted-stabilators-for-hasegawa-academy","title":"F-4 Phantom Slotted Stabilators (for Hasegawa, Academy)","description":"\u003cp\u003eThis is a set of slotted stabilators for all types of F-4 Phantom by Hasegawa or Academy. It includes separate PE pivot cover plates and stiffener \"\"fishplates\"\" (for Air Force variants). The stabs can be used as a drop fit replacement for the kit parts or, with some work on the kit plastic, be built in your position of choice with the cover plates always in the corresponding, correct position.\u003c\/p\u003e\n\u003cp\u003eThe stabilators are now cast in a special, hard resin, have no casting block and have actual open slots. Only minimal clean-up is required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eimmediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46851813212413,"sku":"HMR 48012","price":2000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/SlottedStabsSet.jpg?v=1762513587"},{"product_id":"f-4-phantom-unslotted-stabilators-for-hasegawa-academy","title":"F-4 Phantom Unslotted Stabilators (for Hasegawa, Academy)","description":"\u003cp\u003eThis is a set of unslotted stabilators for all types of F-4 Phantom by Hasegawa or Academy. It includes separate PE pivot cover plates and stiffener \"\"fishplates\"\" (for Air Force variants). The stabs can be used as a drop fit replacement for the kit parts or, with some work on the kit plastic, be built in your position of choice with the cover plates always in the corresponding, correct position.\u003c\/p\u003e\n\u003cp\u003eThe stabilators are now cast in a special, hard resin and have no casting block. Only minimal clean-up is required.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46851816456445,"sku":"HMR 48013","price":2000.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/UnslottedStabsSet.jpg?v=1762514138"},{"product_id":"martin-baker-mk-h5-ejection-seats-navy","title":"Martin Baker Mk. H5 Ejection Seats (for early F-4 Phantom)","description":"\u003cp\u003eThis is a set of two 1:48 Martin Baker Mk. H5 ejection seats for early F-4B, F-4C and F-4D Phantoms (until around 1970). \u003cbr\u003e\u003cbr\u003eSuitable for and tested with \u003cstrong\u003eAcademy\u003c\/strong\u003e, \u003cstrong\u003eHasegawa,\u003c\/strong\u003e \u003cstrong\u003eZoukei Mura\u003c\/strong\u003e and \u003cstrong\u003eTamiya\u003c\/strong\u003e kits. The seats have cast on seat belts which differ from each other. The face curtain handles are 3D printed parts, made in a somewhat flexible resin to avoid breakage. The handle rings are open and won't have to be weeded out\/clean up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose\u003c\/strong\u003e between \u003cstrong\u003eNavy\u003c\/strong\u003e and \u003cstrong\u003eAir Force\u003c\/strong\u003e seat sets as they are different in seat cushion, oxygen bottle\/supply connectors and other small detail. 1:48 scale.\u003c\/p\u003e\n\u003cp\u003eThe sets have a mounting \"T\" tab included which can be fitted to the seat backs (but is optional). With that the seats can be \"hung\" to the ejection rails, exactly like the seats in the Tamiya kit. All seat sets (both Navy and Air Force) come with the \"T\" pieces.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Navy","offer_id":46851822452989,"sku":"HMR 48014-1","price":1200.0,"currency_code":"JPY","in_stock":true},{"title":"Air Force","offer_id":46851822485757,"sku":"HMR 48014-2","price":1200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/NavySeatsrev2.jpg?v=1762514484"},{"product_id":"f-4-phantom-canopy-details","title":"F-4 Phantom Canopy Details","description":"\u003cp\u003eThese are detail parts for the inner canopies on F-4 Phantoms. Each set comprises of resin and PE parts for windscreen, forward-, centre- and rear canopies and includes canopy actuator jacks, safety uplocks (optional installation), detailed downlocks, forward and rear compasses and various detail parts for the centre canopy section. Parts are included for all major variants: F-4B\/N, F-4C\/D, F-4J\/S, F-4E\/EJ, F-4F and FG.1\/FGR.2. Also included are parts for the VTAS system in the front canopy on late F-4J's, F-4N and F-4S as well as two lengths of different diameter copper wire for cable detail. \u003cem\u003eNote that clear parts are not included!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eI'd recommend the following books as ideal build references:\u003c\/p\u003e\n\u003cp\u003eFor (US)Navy Phantoms:\u003c\/p\u003e\n\u003cp\u003eDanny Coremans' \u003ca data-cke-saved-href=\"http:\/\/ultra.glo.be\/daco\/KDCB004.html\" href=\"http:\/\/ultra.glo.be\/daco\/KDCB004.html\"\u003eUncovering the US Navy F-4 B\/J\/N\/S Phantom\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor Air Force Phantoms:\u003c\/p\u003e\n\u003cp\u003eJake Melampy's \u003ca data-cke-saved-href=\"http:\/\/www.reidairpublishing.com\/products\/RAP06.html\" href=\"http:\/\/www.reidairpublishing.com\/products\/RAP06.html\"\u003eThe Modern Phantom Guide - The F-4 Phantom II Exposed\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEagle Aviation's \u003ca data-cke-saved-href=\"http:\/\/eagleaviation.gr\/work\/f-4e-phantom-aup-under-the-skin\/\" href=\"http:\/\/eagleaviation.gr\/work\/f-4e-phantom-aup-under-the-skin\/\"\u003ePhantom Under The Skin I\u003c\/a\u003e and \u003ca data-cke-saved-href=\"http:\/\/eagleaviation.gr\/work\/rf-4e-f-4e-phantom-ii-phantom-under-the-skin-vol-ii\/\" href=\"http:\/\/eagleaviation.gr\/work\/rf-4e-f-4e-phantom-ii-phantom-under-the-skin-vol-ii\/\"\u003eII\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSelect\u003c\/strong\u003e variant for\u003cstrong\u003e Hasegawa, Academy\u003c\/strong\u003e or \u003cstrong\u003eZoukei Mura\u003c\/strong\u003e kits.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Hasegawa","offer_id":46851849355517,"sku":"HMR 48016-1","price":1500.0,"currency_code":"JPY","in_stock":true},{"title":"Academy","offer_id":46851849388285,"sku":"HMR 48016-2","price":1500.0,"currency_code":"JPY","in_stock":true},{"title":"Zoukei Mura","offer_id":46851849421053,"sku":"HMR 48016-3","price":1500.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/HMR48016-1.jpg?v=1762516092"},{"product_id":"mcdonnell-370gal-wing-tanks-for-f-4-phantom-for-academy-hasegawa-tamiya","title":"McDonnell 370gal Wing Tanks for F-4 Phantom (for Academy, Hasegawa, Tamiya)","description":"\u003cp\u003eA pair (2) of early McDonnell type 370gal wing drop tanks for F-4 Phantoms. Mainly applicable for \u003cem\u003eearly\u003c\/em\u003e Phantoms such as F4H-1\/F-4B\/C\/(D), but seen as late as 1973 on an F-4J. Separate, handed pylons are included. The tanks are cast in hollow halves that are very easy to clean up and assemble due to no casting blocks.\u003c\/p\u003e\n\u003cp\u003eDepending on which kit you'd like to use the tanks on, please select your required pylon between \u003cu\u003efour\u003c\/u\u003e options:\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eAcademy:\u003c\/u\u003e there are separate pylon options for the \u003cu\u003ethin wing\u003c\/u\u003e (B\/N), and their \u003cu\u003ethick wing\u003c\/u\u003e (C\/D\/J) as Academy have engineered a completely different wing profile, even at the outer pylon area. The thin wing pylons won't fit properly on the thick wings and vice versa which is why there are the separate options.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eHasegawa:\u003c\/u\u003e The pylons for Hasegawa kits will fit both their thick (C\/D\/J) and their old raised panel line thin wing (B\/N). This pylon option will also fit Zoukei Mura kits if the mounting pins are replaced in a different position.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eTamiya:\u003c\/u\u003e for now, only the thin wing F-4B is released but I see no reason why the pylons won't fit a future thick wing C\/D\/J release. After all this is Tamiya and they would get the wing shape correct (unlike Academy...).\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Academy thin wing (B\/N)","offer_id":46851859546365,"sku":"HMR 48019-1","price":1800.0,"currency_code":"JPY","in_stock":true},{"title":"Academy thick wing (C\/D\/J)","offer_id":46851859579133,"sku":"HMR 48019-2","price":1800.0,"currency_code":"JPY","in_stock":true},{"title":"Hasegawa","offer_id":46851859611901,"sku":"HMR 48019-3","price":1800.0,"currency_code":"JPY","in_stock":true},{"title":"Tamiya","offer_id":46851859644669,"sku":"HMR 48019-4","price":1800.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/TankswholeSet.jpg?v=1762516980"},{"product_id":"f-4-phantom-outer-pylons-navy-1-48","title":"F-4 Phantom Outer Pylons, Navy, 1:48","description":"\u003cp\u003eThis is a set of Navy type outer wing pylons. The mounting pins are designed to fit the Zoukei Mura Phantoms (J and S) exactly, but can be easily modified to fit other kits (Hasegawa etc.). The set comes with separate sway brace pins so the modeller can adapt them freely to the specific store and at the correct outboard angle (in case of MER or TER installed). The photos show the pylon both with symmetrical (single store) and asymmetrical (MER or TER) sway brace pin configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46853840208125,"sku":"HMR 48028","price":1200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/Setside.jpg?v=1762603091"},{"product_id":"f-4-phantom-fuselage-correction-set-for-zoukei-mura","title":"F-4 Phantom Fuselage Correction Set (for Zoukei Mura)","description":"\u003cp\u003eThis is a set of aft fuselage half parts that correct the shape error on the engine shoulders of the Zoukei Mura short nose Phantoms. In addition to the re-shaped geometry, some surface detail has been improved. Please note that this is not a drop-fit replacement set. Cutting of the fuselage is required, as well as some sanding of the remaining kit plastic and then puttying and blending of the new resin parts. However, the work is actually not very difficult. Self adhesive cutting guide strips are provided that will mark the precise cutting line and guide your tool. As always, thorough instructions are provided that guide through the process without ambiguity.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46853843288317,"sku":"HMR 48029","price":1700.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/DSC_0949a.jpg?v=1762603335"},{"product_id":"f-4-phantom-stabilator-upgrade-for-zoukei-mura","title":"F-4 Phantom Stabilator Upgrade (for Zoukei Mura)","description":"\u003cp\u003eThis is an upgrade set for \u003cstrong\u003eZoukei Mura\u003c\/strong\u003e Phantoms. As per the kit, the stabilators can only be mounted in one (or two) position(s). With this set, you can set the stabilators in any position of your choice and improve the detail on the stabilator pivot cover plates as well. Also included are the reinforcement \"fish\" plates found on Air Force Phantom stabilators (not found in the ZM kits). The photos also show how a \"pitch up\" and \"pitch down\" position looks like before the PE cover plates are installed. Note this set does not make the stabilators movable. After the position is selected, everything has to be glued in place.\u003c\/p\u003e\n\u003cp\u003eEven though some modification work on the kit is necessary this set has been designed to be as easy and straight forward as possible. In addition to the new stabilator mounting block there are two resin \"plugs\" included that just clip into the kit's stabilator mounting slots. You then scribe a line around them to mark exactly where to make the cut out in the correct size and shape.\u003c\/p\u003e\n\u003cp\u003eThe instructions also come with a 1:48 line drawing to indicate the exact position for the stabilator reinforcement plates.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46853942444285,"sku":"HMR 48032","price":1200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/SetTotal_0381b66a-b1ce-42df-acd3-422bb95a9160.jpg?v=1762604192"},{"product_id":"f-4-phantom-outer-pylons-air-force","title":"F-4 Phantom Outer Pylons, Air Force","description":"\u003cp\u003eF-4 Phantom outer pylons, Air Force type, 1:48, designed for the Zoukei Mura line of kits, but fit Meng just as well (and can also be fitted to Hasegawa kits, with small modifications). The pylons have the correct outboard angle built in and come with separate sway brace pins so stores can be mounted at correct angles, either canted in line with the pylon or perpendicular to the ground.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46853951783165,"sku":"HMR 48034","price":1200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/PylonSet1.jpg?v=1762605242"},{"product_id":"f-4-phantom-centreline-pylon-for-zoukei-mura","title":"F-4 Phantom Centreline Pylon (for Zoukei Mura)","description":"\u003cp\u003eThis is a centreline pylon set specifically designed for Zoukei Mura's F-4 Phantom line of kits. This C\/L pylon fits on and into the detail moulded onto the Zoukei Mura lower wing surface. This F-4 Phantom Centreline pylon comes with two sets of separate pins - one for the larger stabiliser pins and the smaller sway brace pins that connect to the stores to be mounted.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46853952340221,"sku":"HMR 48035","price":1000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/PylonSet1_718546c4-564b-4101-b997-1bb7ac59e340.jpg?v=1762605378"},{"product_id":"f-4-phantom-centreline-pylon-for-tamiya","title":"F-4 Phantom Centreline Pylon (for Tamiya)","description":"\u003cp\u003eThis is a centreline pylon set specifically designed for Tamiya's F-4 Phantom (currently only F-4B) kits. The C\/L pylon fits on and into the moulded-on mounting tab between the Aux doors on Tamiya's kit with a simple modification (it needs to be shortened and slightly re-shaped). This 1:48 centreline pylon detailing kit comes with two sets of separate pins - one for the larger stabiliser bolts and the smaller sway brace pins that connect to the stores to be mounted.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855413858557,"sku":"HMR 48042","price":1000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/TamCLPylonSet.jpg?v=1762687093"},{"product_id":"f-4-phantom-plain-fin-cap-for-tamiya","title":"F-4 Phantom Plain Fin Cap (for Tamiya)","description":"\u003cp\u003eThis is an early, plain fin cap without any RHAW or ECM pods as used on early F-4B (and C). Designed as a drop in replacement part for the \u003cu\u003eTamiya\u003c\/u\u003e kit.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855415431421,"sku":"HMR 48043","price":700.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/F-4PlainFinCap.jpg?v=1762687230"},{"product_id":"f-4n-phantom-conversion-set-for-tamiya","title":"F-4N Phantom Conversion Set (for Tamiya)","description":"\u003cp\u003eThis conversion set includes the AN\/ANQ-126 fairings for the intakes (with mounting holes to match Tamiya's moulded-on pins), a fin cap with the correct sensor bulge for the N model, a new RIO instrument panel and an external rear view mirror. Further N specific parts are already included in the Tamiya B kit.\u003c\/p\u003e\n\u003cp\u003eHeads-up for two new F-4N decal sheets by Bullseye Model Aviation, available now via Sprue Brothers:\u003ca href=\"https:\/\/spruebrothers.com\/bma48056-1-48-bullseye-model-aviation-decals-f-4n-phantom-ii-fleet-phantoms-viii\/\"\u003e Bullseye 48-056\u003c\/a\u003e + \u003ca href=\"https:\/\/spruebrothers.com\/bma48057-1-48-bullseye-model-aviation-decals-f-4n-phantom-ii-fleet-phantoms-ix\/\"\u003e48-057\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855417463037,"sku":"HMR 48044","price":1700.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/F-4NWholeSet.jpg?v=1762687343"},{"product_id":"f-4c-strike-cam-pod-for-zoukei-mura","title":"F-4C Strike Cam Pod (for Zoukei Mura)","description":"\u003cp\u003eThe is a strike camera chin pod for the nose of the Zoukei Mura F-4C. This pod was used for example by Col Robin Olds on Operation Bolo. Later, many of these chin pods were re-fitted with forward RHAW pods, retaining only the rearward facing camera. Included in this set are two types of front ends - the original camera fitting\/lens and the later RHAW pod. The main parts are all 3D printed with very little clean up required. The camera glass covers are provided as pre-cut clear styrene. For fitting, only the tiniest modification is necessary on the ZM nose. Masks to cover the transparencies for painting are included as well.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855422935293,"sku":"HMR 48048","price":1000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/StrikeCamPodallparts3.jpg?v=1762688183"},{"product_id":"mb-mk-h5-h7-face-curtain-handles","title":"MB Mk. H5 \/ H7 Face Curtain Handles","description":"\u003cp\u003eThese are 3D printed face curtain handles for MB Phantom ejection seats. The handles are mainly designed for the Hypersonic Models Mk. H5 seats but can be used on other types (H7) and manufacturer's seats as well. The handles are 3D printed but from a slightly elasctic resin that doesn't break as easily. It's not like rubber and the parts are not unbreakable, but they withstand normal handling and building\/painting easily. This is a set of five double sets, so ten handles.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855424344317,"sku":"HMR 48049","price":700.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/3Dhandlesx5.jpg?v=1762688396"},{"product_id":"f-4b-irst-pod-for-tamiya","title":"F-4B IRST Pod (for Tamiya)","description":"\u003cp\u003eThis is a 1:48 IRST equipped chin (radome) pod for early F-4B's, specifically for the Tamiya kit. While not from the very start of production deliveries, F-4B's were fitted with this Infra-red Search and Track system from approx 1962. The original pod in the Tamiya kit is the late type, having a longer non-IRST forward fairing. A simple, drop-fit replacement part for the kit pod, no additional work necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855424737533,"sku":"HMR 48050","price":700.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/IRSTSide.jpg?v=1762688593"},{"product_id":"f-4b-non-irst-pod-early-for-tamiya","title":"F-4B Non-IRST Pod (early) (for Tamiya)","description":"\u003cp\u003eThis is a non-IRST chin (radome) pod for early F-4B's, specifically for the Tamiya kit. This pod\/fairing was fitted to early F-4B's before and after the short \"era\" of the IRST system. While in development during the F4H \/F4H-1 phase, the first regular F-4B off the production line were not yet fitted with the IRST pod until ca. 1962. Instead, they were fitted with this early, empty pod under the radome.\u003c\/p\u003e\n\u003cp\u003eHowever, the IRST sytem wasn't working as well as anticipated and it was deleted soon, to be repalced again with either this short, empty pod, or later on with the pod in the Tamiya kit which is the late type, having longer forward fairing. This pod has the shorter, early forward fairing, seen on many early operational F-4B's. Please check your reference photo(s). A simple one-piece like-for-like resin replacement part.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855425196285,"sku":"HMR 48051","price":700.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/Non-IRSTSide.jpg?v=1762688697"},{"product_id":"f-4-phantom-stabilator-upgrade-set-for-tamiya","title":"F-4 Phantom Stabilator Upgrade Set (for Tamiya)","description":"\u003cp\u003eThis is an upgrade set for the stabilator area of the Tamiya F-4 Phantom kit(s). It replaces the kit's overly thick stabiltor cover plates and guide tracks with much thinner and more detailed PE parts. At the same time, you will also install the kit's separate lower tail insert module early on. You will then paint and weather the NMF area without having to worry about a seamless join later.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBeware:\u003c\/span\u003e To achieve this you need to separate the one-piece stabilator part into left and right stabs. The provided 3D print parts enable a secure, correctly positioned re-joining later. Also provided is a set of self-adhesive masks to correctly position the PE plate tracks (before painting).\u003c\/p\u003e\n\u003cp\u003eComprehensive instructions are included.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855425720573,"sku":"HMR 48052","price":1200.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/Set_131e8668-a5ee-4c91-bc1c-854e874dc773.jpg?v=1762688810"},{"product_id":"f-4e-tiseo-for-meng","title":"F-4E TISEO (for Meng)","description":"\u003cp\u003eThis is a TISEO pod for the Meng F-4E kit, 1:48. The pod parts are 3D printed and the glass is a cast clear resin piece. A paint mask is provided as well.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46855433257213,"sku":"HMR 48056","price":1000.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/TISEOSet.jpg?v=1762689493"},{"product_id":"mcdonnell-370-gal-wing-tanks-f-4-phantom-1-72","title":"McDonnell 370 Gal Wing Tanks (F-4 Phantom) 1:72","description":"\u003cp\u003eThis is a pair (2) of early McDonnell type 370gal wing drop tanks for F-4 Phantoms. Mainly applicable for early Phantoms such as F4H-1\/F-4B\/C\/D, but seen as late as 1973 on an F-4J. Separate, handed pylons are included. The pylons are designed to be drop fits for the Fine Molds kits, but can be used with any 1:72 Phantom kit with the mounting pins modified.\u003c\/p\u003e\n\u003cp\u003eThis set is a design update from the earlier item HMR72001 and is entirely 3D printed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: small;\"\u003eThis is not a toy, suitable for modellers 14+ years old.\u003cbr\u003eKeep out of reach of small children (below 3 years old),\u003cbr\u003emay contain small parts. Paint or glue are not included.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eA detailed product risk assessment can be found by clicking \u003ca href=\"https:\/\/www.hypersonicmodels.com\/pages\/product-risk-assessment\"\u003ehere\u003c\/a\u003e.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: small;\"\u003eHypersonic Models commits to continuous quality control to comply with its promise of product quality.\u003cbr\u003e\u003cbr\u003eIn case of any problems, please \u003ca href=\"https:\/\/www.hypersonicmodels.com\/pages\/contact\"\u003econtact us\u003c\/a\u003e immediately.\u003c\/span\u003e\u003c\/p\u003e","brand":"Hypersonic Models","offers":[{"title":"Default Title","offer_id":46856834941181,"sku":"HMR 72003","price":1400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0783\/8721\/6637\/files\/72TanksSet.jpg?v=1762756689"}],"url":"https:\/\/cuyhdu-bj.myshopify.com\/collections\/f-4-phantom-coll.oembed","provider":"Hypersonic Models","version":"1.0","type":"link"}